Siemens SINAMICS G220 - Page 448

- 3011 -
1
Setpoint channel Fixed speed setpoints, direct selection (p1016 = 1)
© Siemens AG
2 3 4 5 6 7 8
V6.02.00
1 1 1 1
2 2 2 2
r1198 r1198.3 1 = Fixed setpoint bit 3
[3010] [3010] [3010] [3010]
Fixed speed setpoint select mode
p1016 (1)
[2505.6]
c1020
[2505.6]
c1021
[2505.6]
c1022
[2505.6]
c1023
r1198 r1198.2 1 = Fixed setpoint bit 2 r1198 r1198.1 1 = Fixed setpoint bit 1 r1198 r1198.0 1 = Fixed setpoint bit 0
r1024
Fixed speed setpoint effective [rpm]
≥1
0 0 0 1 0 0 1 0 1 0 0 0 0 1 0 0
+
+
+
+
+
+
Fixed speed setpoint 1 [rpm]
p1001 [D] (0.000)
Fixed speed setpoint 2 [rpm]
p1002 [D] (0.000)
Fixed speed setpoint 3 [rpm]
p1003 [D] (0.000)
Fixed speed setpoint 4 [rpm]
p1004 [D] (0.000)
r1025.0 1 = Fixed speed setpoint selected
Figure14-56 3011 - Fixed speed setpoints, direct selection
Functions
14.9Setpoint channel
SINAMICS G220 converter
446 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB