Phaser 6180MFP Multifunction Printer Service Manual 3-115
Error Messages and Codes
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1.Check the Multi-Protocol Network
Card (MPC) for correct installation.
2.Is the MPC correctly installed?
Go to step 2. Reseat the MPC
(page 8-95).
Go to step 2.
2 Does the error still occur when the
printer is turned On?
Go to step 3. Complete.
3 1.Replace the Multi-Protocol Network
Card (page 8-95).
2.Does the error still occur?
Replace the
Image
Processor Board
(page 8-90).
Complete.
To Next Page
Loading...
Need help?
General
