Xerox Phaser 6180MFP - Tray 3 Feed Clutch (PL13.2.5)

8-124 Phaser 6180MFP Multifunction Printer Service Manual
Service Parts Disassembly
Tray 3 Feed Clutch (PL13.2.5)
1. Remove the Optional 550-Sheet Feeder (page 8-116).
2. Remove the Tray 3 Rear Cover (page 8-118).
3. Remove the Optional Feeder Assembly (page 8-117).
4. Remove the Front Right Cover (page 8-121).
5. Remove the Tray 3 OPF Right Cover (page 8-122).
N
o
t
e
When performing the following step, leave the junction connector on the
Optional Frame Assembly.
6. Disconnect the Tray 3 Feed Clutch connector P/J4213.
7. Release the Clamp securing the Tray 3 Feed Clutch wiring harness to the
Feed Shaft.
8. Remove the KL-ring securing the Optional Feed Clutch to the Optional
Feed Shaft.
9. Remove the Optional Feed Clutch from the Optional Feed Shaft.
s6180mfp-337
P/J4213