1-32 Phaser 6180MFP Multifunction Printer Service Manual
General Information
Mounting Surface Specifications
These specifications apply to any printer used as a table-top printer.
1. In order to function properly, the printer must be placed on a surface with
the following minimum dimensions.
2. Mounting surface flatness must be within the specified range.
60 cm (23.6 in.)60 cm
(23.6 in.)
121.5 cm (47.7 in.)
10 cm (4.0 in.)
10 cm (4.0 in.)
10 cm (4.0 in.)
s6180mfp-138
Right Hand Side
s6180mfp-139
5 mm (2.0 in.) Max
To Next Page
Loading...
