3-188 Phaser 6180MFP Multifunction Printer Service Manual
Error Messages and Codes
Controller Error
The Controller has detected errors. The following troubleshooting procedure
applies to these errors.
Applicable Chain Link
■ Chain Link 017-971: Controller Error (FlashROM Write Error)
■ Chain Link 017-972: Controller Error (FlashROM Erase Error)
■ Chain Link 017-973: Controller Error (FlashROM Suspend Error)
■ Chain Link 017-974: Controller Error (FlashROM Resume Error)
■ Chain Link 017-975: Controller Error (File Handle Over)
■ Chain Link 017-976: Controller Error (File Table Over)
■ Chain Link 017-977: Controller Error (File Count Over)
■ Chain Link 017-978: Controller Error (File Page Over)
■ Chain Link 017-979: Controller Error (Double File Open)
■ Chain Link 017-983: Controller Initialized NVM (EEPROM R/W Error)
■ Chain Link 017-986: Controller Error (Create 0 Byte File)
■ Chain Link 017-987: Controller Error (File Read Error)
■ Chain Link 017-989: Controller Error (File Write Error)
■ Chain Link 117-310: Controller Error (Main Program Sum Error)
■ Chain Link 117-311: Controller Error (Parameter Sum Error)
■ Chain Link 117-312: Controller Error (Download Program Sum Error)
■ Chain Link 117-322: Error (SYSMGR Task Error)
■ Chain Link 117-328: Error (MSCAN Task Error)
■ Chain Link 117-335: Error (DFAX Task Error)
■ Chain Link 117-336: Error (Pull Task Error)
■ Chain Link 117-337: Error (IITTX Task Error)
■ Chain Link 117-340: Error (Hook Task Error)
■ Chain Link 117-344: Error (Flash File Task Error)
■ Chain Link 117-348: Error (IITRX Task Error)
■ Chain Link 117-349: Error (SCANMGR Task Error)
■ Chain Link 117-350: Error (Task Initialize Error)
Initial Actions
■ Cycle printer power.
To Next Page
Loading...
