Xerox Phaser 6180MFP - Printer Configurations

Phaser 6180MFP Multifunction Printer Service Manual 1-3
General Information
Printer Configurations
The Phaser 6180MFP printer is available in two configurations.
* All configurations have one memory slot supporting 256 MB/ 512 MB/ 1 GB DDR2 DIMMs, to a
maximum of 1.4 GB. Standard RAM is soldered on board.
Phaser 6180MFP Configurations
Features Printer Configurations
6180MFP/N 6180MFP/D
Processor and Clock Speed 400 MHz 400 MHz
Memory Configuration* 384 MB 384 MB
Print Speed (Color/Mono) (ppm) 20/31 20/31
Print Speed - Maximum Duplex
(Letter/A4) (Color/Mono) (ppm)
14/21 14/21
Printer Resolutions (dpi)
■ Standard
■ Enhanced
600 x 600 x 1 bit
600 x 600 x 4 bit
600 x 600 x 1 bit
600 x 600 x 4 bit
Adobe PostScript 3 Fonts Standard Standard
PCL6 Fonts Standard Standard
Job Pipelining Standard Standard
USB 2.0 Hi-Speed Support Standard Standard
Parallel Port Standard Standard
Ethernet Interface 10/100 Base-TX 10/100 Base-TX
Tray 1 (MPT) (150 Sheet) Standard Standard
Tray 2 (250 Sheet) Standard Standard
Tray 3 550-Sheet Feeder (550 Sheet) Optional Optional
Duplex Unit Optional Standard
Wireless LAN Optional Optional
Copy Resolutions (dpi)
■ Color Resolutions
■ Mono Resolutions
600 x 600
600 x 600
600 x 600
600 x 600
Copy Speed (ipm or ppm)
■ From Document Glass (Color/Mono)
■ From Document Feeder (Color/Mono)
20/11
23/13
20/11
23/13
Scan Resolutions (dpi)
■ USB Scanning
■ Network Scanning
Up to 9600 dpi
Up to 600 dpi
Up to 9600 dpi
Up to 600 dpi
Scan Speed (color/mono) (ppm) 8/16 8/16
Warranty 1 year onsite 1 year onsite