Phaser 6180MFP Multifunction Printer Service Manual 1-39
General Information
Toner Remaining Amount
The CentreWare Internet Services (IS) and PrintingScout (SimpleMonitor)
allow the printer to display toner remaining amount.
Maintenance Function
Firmware Update
The Image Processor Board and Multi-Protocol Network Card firmware can
be updated by customers and service technicians using Windows PC or
Macintosh with dedicated utilities. Firmware updates are available at
www.xerox.com/office/6180MFPsupport.
Detailed procedures are available in the “Firmware Update” on page A-3.
o
e
Boot Code can be updated via USB or Parallel port only.
Print Cartridge Control Panel Display
Print Cartridge Control Panel Display Functionality
Normal Status
Life Warning
Error
End of
Life Error
Xerox Xerox (TM)
Print Cartridge
Replace
Soon
Replace
Print
Cartridge
Prints with full
functionality.
Xerox (refill
Print
Cartridge)
Xerox (TM)
Print Cartridge
Replace
Soon
Empty Prints with full
functionality up to
40% of the Print
Cartridge life.
Other OEM
(non-Xerox
printer
manufacturer)
Non-Xerox Print
Cartridge
Printer displays error
and will not print.
Non-Xerox
Print Cartridge
Manufacturer
Non-Xerox Print
Cartridge
No Life
Tracking
Replace
Print
Cartridge
Prints with full
functionality.
Updated Firmware Windows
Via USB/IEEE1284 Via Network (port 9100)
Image Processor Board Available Available
Multi-Protocol Network Card Available Available
MCU Board* Available Available
* MCU Board cannot be updated when ROM starts to be used for MCU Board.
To Next Page
Loading...
Need help?
General
