Phaser 6180MFP Multifunction Printer Service Manual 8-13
Service Parts Disassembly
Tray 1 (MPT) Feed Roller (PL3.1.10)
1. Remove Tray 2.
2. Release the MPT Core Roll hook (PL3.1.9) on the right side of the MPT
Feed Roller and slide the MPT Core Roll to the right.
3. Slide the MPT Roller to the right to release the groove on the MPT Roller
from the vertical pin mounted on the MPT Shaft (PL3.1.12).
4. Rotate the Tray 1 (MPT) Feed Roller 180° and remove it from the Shaft.
s6180mfp-206
180°
To Next Page
Loading...
