Xerox Phaser 6180MFP Service Manual

Phaser 6180MFP Multifunction Printer Service Manual 6-11
Adjustments and Calibrations
Printer Parameter Setting
This function reads/writes the parameter values, errors, and life counter
values stored in the printer.
N
o
t
e
Print the parameter list from the Service Diagnostics menu - Service
Mode > Printer Diag > Parameter > Print before changing the
registration value.
To access the Parameter menu:
1. Turn the printer power Off (if the printer is On).
2. Simultaneously press the Up Arrow and Down Arrow buttons and turn
on the printer.
3. The Service Mode menu is displayed.
4. Select Printer Diag and press the OK button.
5. Press the Up Arrow or Down Arrow button to find Parameter. Press the
OK button.
6. Press the Up Arrow or Down Arrow button to find the appropriate item to
change (i.e., Slow Scan KtoP). Press the OK button.
7. Enter the appropriate range using the Up Arrow or Down Arrow button.
Press the OK button to save the value.
8. The new value “# *” is displayed. The Parameter menu is displayed.
9. Press the Exit button to return to the Printer Diag menu. Press the Up
Arrow or Down Arrow button to find Exit Mode. Press the OK button.
10. Complete Exit message is displayed. Press the OK button.
11. Exit? message is displayed. Press the OK button.
12. Please wait... --> Ready messages are displayed on the printer Control
Panel.
N
o
t
e
“*” = data has been saved

Xerox Phaser 6180MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Scan Type	Flatbed, ADF
Fax Capability	Yes
Fax Transmission Speed	33.6 Kbps
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	500 sheets
Max Paper Size	8.5 x 14 in
Connectivity	USB 2.0, Ethernet
Scan Resolution	1200 x 1200 dpi
Supported Paper Sizes	Letter, Legal, Executive, A4, A5, B5
Operating System Compatibility	Windows, Mac OS, Linux
Maximum Print Resolution	600 x 600 dpi