Phaser 6180MFP Multifunction Printer Service Manual 1-11
General Information
Printer Options
Phaser 6180MFP Multifunction printer options include:
■ Additional Memory (256 MB/ 512 MB/ 1GB)
■ Optional 550-Sheet Feeder (Tray 3)
■ Duplex Unit
■ Multi-Protocol Network Card
Additional Memory
The printer features one slot that accepts 256 or 512 MB, or 1 GB of DDR2
DIMMs. The standard 384 MB memory is soldered on board. Memory
modules must meet the following characteristics:
■ 200 Pin DDR2 DIMM (8 chip type)
■ Unbuffered, Non-parity
The printer’s Configuration page lists the amount of RAM installed in the
printer.
Duplex Unit
User can install the Duplex Unit without using any tools by simply removing
the Transfer Unit.
s6180mfp-134
Duplex Unit
s6180mfp-135
To Next Page
Loading...
