Phaser 6180MFP Multifunction Printer Service Manual 3-121
Error Messages and Codes
6 1.Reseat the Transfer Unit (page 8-9).
2.Does the error still occur when the
printer is turned On?
Replace the
Transfer Unit
(page 8-9).
Complete.
7 1.Check the error on the Control Menu
display.
2.Is the “ADDR:31**” error
displayed?
Go to step 8. Complete.
8 1.Reseat the HVPS (page 8-64).
2.Does the error still occur after the
printer is turned On?
Replace the
HVPS
(page 8-64).
Complete.
9 1.Reseat the MCU Board (page 8-88).
2.Does the error still occur after the
printer is turned On?
Replace the
MCU Board
(page 8-88).
Complete.
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No
To Next Page
Loading...
