3-166 Phaser 6180MFP Multifunction Printer Service Manual
Error Messages and Codes
5 1.Check the network connection.
Reseat the network connector.
2.Does the error still occur?
Go to step 6.
If an MPC Card
is not installed,
go to step 7.
Complete.
6 1.Check the MPC Card for correct
installation. Reseat the MPC Card
(page 8-95).
2.Does the error still occur when
connecting to the server?
Go to step 7. Complete.
7 1.Check the network setting: System >
Admin Menu > Network Settings.
2.Is the printer network setting
correct?
Go to step 8. Change the
Network Setting
information.
8 1.Check the Image Processor Board
for correct installation. Reseat the
Image Processor Board
(page 8-90).
2.Does the error still occur when
connecting to the server?
Replace the
Image
Processor Board
(page 8-90).
Complete.
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No
To Next Page
Loading...
