Xerox Phaser 6180MFP - Page 395

Phaser 6180MFP Multifunction Printer Service Manual 3-207
Error Messages and Codes
3 1.Check the country setting: System >
Admin Menu > Fax Settings >
Country.
2.Is the country setting correct?
Go to step 4. Set the country
setting to the
correct country.
4 1.Check Scanner Controller Board for
correct installation. Reseat the
Scanner Controller Board
(page 8-99).
2.Does the error still occur when
faxing?
Replace the
Scanner
Controller Board
(page 8-99).
Complete.
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No