AudioCodes E-SBC

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
■ The field is included in the default CDR.
■ The field is applicable to "CALL_CONNECT", "MEDIA_START", "CALL_
END", and "MEDIA_END" CDR Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "Coder" in the CDR.
■ The maximum number of characters for Syslog tabular alignment is 15.
Conn ID
[502]
Displays the Digital Connection ID.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to Gateway CDRs.
■ The default field title is "ConId" in the CDR.
■ The maximum number of characters for Syslog tabular alignment is 5.
Connect
Time
[412]
Displays the date and time that the call was connected. The field is a string of
up to 35 characters and in the following format: <hh:mm:ss:ms> UTC <DDD>
<MMM> <DD> <YYYY>. For example, "17:00:49.053 UTC Thu Dec 14 2017"
Note:
■ To configure the time zone string (e.g., "UTC" - default, "GMT+1" and
"EST"), use the TimeZoneFormat parameter.
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_CONNECT" and "CALL_END" CDR
Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "ConnectTime" for Syslog and Local Storage, and
"h323-connect-time=" for RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 35.
Dest Port
[406]
Displays the SIP signaling destination UDP port. The field is an integer of up to
10 digits.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SigDestPort" for Gateway Syslog and Local
Storage, and "DestPort" for SBC Syslog and Local Storage.
■ The maximum number of characters for Syslog tabular alignment is 11.
Destination
Host Before
Manipulation
[815]
Displays the original destination hostname (before manipulation, if any).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
- 985 -