AudioCodes E-SBC

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
Destination
Host Name
Before
Manipulation
[518]
Displays the original destination hostname (before manipulation, if any).
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to Gateway CDRs.
■ The default field title is "DstHostBeforeMap".
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
Host Name
[519]
Displays the destination hostname (after manipulation, if any).
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to Gateway CDRs.
■ The default field title is "DstHost".
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
Host
[813]
Displays the destination hostname (after manipulation, if any).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
IP
[403]
Displays the destination IP address. The field is a string of up to 20 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "DestIp".
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
Number
Before
Manipulation
[510]
Displays the original destination number (before manipulation, if any).
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to Gateway CDRs.
■ The default field title is "DstNumBeforeMap".
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
Number
Plan
[513]
Displays the destination Numbering Plan Identification (NPI).
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to Gateway CDRs.
■ The default field title is "NPI".
- 986 -