AudioCodes E-SBC - Page 1030

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
[606] Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is empty for RADIUS (ACCT_INPUT_OCTETS
standard ID 42).
■ The maximum number of characters for Syslog tabular alignment is 10.
Local Input
Packets
[604]
Displays the number of packets received by the device. The field is an integer
from 0 to 0XFFFFFFFF.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "InPackets" for Syslog and Local Storage, and
empty for RADIUS (ACCT_INPUT_PACKETS).
■ The maximum number of characters for Syslog tabular alignment is 10.
Local Jitter
[610]
Displays the RTP jitter. The field is an integer from 0 to 40000 samples (-1 if
unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "RTPjitter".
■ The maximum number of characters for Syslog tabular alignment is 9.
Local MOS
CQ
[627]
Displays the local MOS for conversation quality. The field is an integer from 10
to 46 (127 if information is unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "LocalMosCQ".
■ The maximum number of characters for Syslog tabular alignment is 10.
Local Output
Octets
[607]
Displays the local output octets (bytes).
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
- 992 -