AudioCodes E-SBC - Page 1031

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is empty for RADIUS (ACCT_OUTPUT_ OCTETS
standard ID 43).
■ The maximum number of characters for Syslog tabular alignment is 10.
Local Output
Packets
[605]
Displays the number of packets sent by the device. The field is an integer from
0 to 0XFFFFFFFF.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "OutPackets" for Syslog and Local Storage, and
empty for RADIUS (ACCT_OUTPUT_PACKETS standard ID 48).
■ The maximum number of characters for Syslog tabular alignment is 10.
Local
Packet Loss
[608]
Displays the number of packets lost of the entire stream. The field is an integer
from 0 to 0xFFFFFFFF (-1 if information is unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "PackLoss" for Gateway Syslog and Local Storage,
and "LocalPackLoss" for SBC Syslog.
■ The maximum number of characters for Syslog tabular alignment is 10.
Local R
Factor
[625]
Displays the local R-factor conversation quality. The field is an integer from 0
to 120 (127 if information is unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "LocalRFactor".
■ If the RTCP XR feature is unavailable (not licensed or disabled), this R-
factor VoIP metric is not provided. Instead, the device sends the CDR field
with the value 127, meaning that information is unavailable.
■ The maximum number of characters for Syslog tabular alignment is 12.
Local Round
Trip Delay
[609]
Displays the average round-trip delay time of the entire RTP stream. The field
is an integer from 0 to 10000 ms (-1 if information is unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
- 993 -