AudioCodes E-SBC - Page 1032

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
■ The default field title is "RTPdelay".
■ The maximum number of characters for Syslog tabular alignment is 9.
Local RTP
IP
[620]
Displays the local RTP IP address.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END", "CALL_CONNECT",
"MEDIA_END", "MEDIA_START", and "MEDIA_END" CDR Report
Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "LocalRtpIp".
■ The maximum number of characters for Syslog tabular alignment is 20.
Local RTP
Port
[621]
Displays the local RTP port. This field is an integer from 0 to 0xFFFF.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END", "CALL_CONNECT",
"MEDIA_START", "MEDIA_UPDATE", and "MEDIA_END" CDR Report
Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "LocalRtpPort".
■ The maximum number of characters for Syslog tabular alignment is 15.
Local SSRC
Sender
[611]
Displays the local RTP synchronization source (SSRC). The field is an integer
from 0 to 0XFFFFFFFF.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "RTPssrc" for Gateway Syslog and Local Storage,
and "TxRTPssrc" for SBC Syslog.
■ The maximum number of characters for Syslog tabular alignment is 14.
Media List
[819]
Displays all the media types (e.g., "audio", "text", and "video") that was used
for the call session. The field is a string.
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable only to the "CALL_END" CDR Report Type.
■ The field is applicable only to SBC signaling CDRs.
■ The maximum number of characters for Syslog tabular alignment is 40.
Media
Realm ID
[427]
Displays the Media Realm ID. The field is an integer.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
- 994 -