AudioCodes E-SBC

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
■ The default field title is "RemoteMosCQ".
■ The maximum number of characters for Syslog tabular alignment is 11.
Remote
Output
Octets
[615]
Displays the remote output octets (bytes).
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format table.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 10.
Remote
Output
Packets
[613]
Displays the number of packets received by the device. The field is an integer
from 0 to 0XFFFFFFFF.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format table.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 10.
Remote
Packet Loss
[616]
Displays the number of packets lost of the entire remote stream. The field is an
integer from 0 to 0xFFFFFFFF (-1 if information is unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "RemotePackLoss".
■ The maximum number of characters for Syslog tabular alignment is 14.
Remote Port
[407]
Displays the remote SIP port. This field is an integer from 0 to 0xFFFF.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format table.
■ The field is applicable only to "CALL_START", "CALL_CONNECT", and
"CALL_END" CDR Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 5.
Remote R
Factor
[626]
Displays the remote R-factor conversation quality. The field is an integer from 0
to 120 (127 if information is unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
- 1000 -