AudioCodes E-SBC

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
■ The default field title is "RemoteRFactor".
■ If the RTCP XR feature is unavailable (not licensed or disabled), this R-
factor VoIP metric is not provided. Instead, the device sends the CDR field
with the value 127, meaning that information is unavailable.
■ The maximum number of characters for Syslog tabular alignment is 13.
Remote
Round Trip
Delay
[617]
Displays the average round-trip delay time of the remote RTP stream. The field
is an integer from 0 to 10000 ms (-1 if information is unavailable).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format tables..
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 9.
Remote
RTP IP
[622]
Displays the remote RTP IP address.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END", "CALL CONNECT", "MEDIA_
START", "MEDIA_UPDATE", and "MEDIA_END" CDR Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "RtpIp" for Syslog Signaling and Local Storage,
"RemoteRtpIp" for Syslog Media, and "h323-remote-address=" for
RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 20.
Remote
RTP Port
[623]
Displays the remote RTP port. This field is an integer from 0 to 0xFFFF.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END", "CALL_CONNECT",
"MEDIA_START", "MEDIA_UPDATE", and "MEDIA_END" CDR Report
Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is ""Port" for Syslog Signaling and "RemoteRtpPort"
for Syslog Media.
■ The maximum number of characters for Syslog tabular alignment is 5.
Remote SIP
User Agent
[818]
Displays the remote SIP User-Agent header value.
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable only to "CALL_START", "CALL_CONNECT", and
"CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling.
■ The maximum number of characters for Syslog tabular alignment is 41.
- 1001 -