AudioCodes E-SBC

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable to SBC media and signaling, and Gateway CDRs.
■ The default field title is "SessionId".
■ The maximum number of characters for Syslog tabular alignment is 24.
Setup Time
[411]
Displays the date and time that the call was setup. The field value is a string of
up to 35 characters and presented in the following format:
<hh:mm:ss:ms> UTC <DDD> <MMM> <DD> <YYYY>. For example,
"17:00:49.052 UTC Thu Dec 14 2017"
Note:
■ To configure the time zone string (e.g., "UTC" - default, "GMT+1", and
"EST"), use the TimeZoneFormat parameter.
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SetupTime"" for Syslog and Local Storage, and
"h323-setup-time=" for RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 35.
Signaling IP
DiffServ
[422]
Displays the signaling IP DiffServ. The field value is an integer of up to 15
digits.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "TxSigIPDiffServ".
■ The maximum number of characters for Syslog tabular alignment is 15.
SIP
Interface ID
[420]
Displays the SIP Interface table row index (integer).
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 5.
SIP
Interface
Name
[433]
Displays the SIP Interface name. The field value is a string of up to 40
characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SIPInterfaceId (name)".
■ The maximum number of characters for Syslog tabular alignment is 32.
- 1003 -