AudioCodes E-SBC

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
SIP Local
Tag
[445]
Displays the 'tag' parameter of the SIP From / To headers that is generated by
the device in the outgoing SIP message . The field value is a string of up to 100
characters.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable to all CDR Report Types, but it may not be added to
some Report Types in all call scenarios.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
SIP Method
[806]
Displays the SIP message type (method). The field value is a string of up to 10
characters:
■ "INVITE"
■ "OPTIONS"
■ "REGISTER"
■ "NOTIFY"
■ "INFO"
■ "SUBSCRIBE"
■ "MESSAGE"
■ "BENOTIFY"
■ "SERVICE"
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The default field title is "SIPMethod".
■ The maximum number of characters for Syslog tabular alignment is 10.
SIP Remote
Tag
[446]
Displays the 'tag' parameter of the SIP From / To headers that is received by
the device in the incoming SIP message . The field value is a string of up to 100
characters.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable to all CDR Report Types, but it may not be added to
some Report Types in all call scenarios.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
SIP
Termination
Description
[430]
Displays the description of the SIP call termination reason. The field value is a
string of up to 70 characters and is set to one of the following:
■ SIP Reason header, if exists, for example: SIP ;cause=200 ;text="Call
completed elsewhere".
■ If no SIP Reason header exists, the description is taken from the reason
text, if exists, of the SIP response code, for example: "417 Unknown
Resource-Priority".
- 1004 -