AudioCodes E-SBC

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
Termination
Side
RADIUS
[435]
Displays the party that terminated the call. The field value is a string:
■ "originate": SBC incoming leg or IP side for Gateway calls
■ "answer": SBC outgoing leg or Tel side for Gateway calls
Note:
■ The field is included in the default CDR.
■ The field is mainly relevant to RADIUS CDRs, but can also be used in
Syslog and Local Storage.
■ The default field title is "terminator=".
■ The maximum number of characters for Syslog tabular alignment is 10.
Termination
Side Yes No
[436]
Displays the party that terminated the call. The field value is a string:
■ "yes": SBC outgoing leg or Tel side for Gateway calls
■ "no": SBC incoming leg or IP side for Gateway calls
The field is applicable to RADIUS CDRs
Note:
■ The field is included in the default CDR.
■ The field is mainly relevant to RADIUS CDRs, but can also be used in
Syslog and Local Storage.
■ The default field title is "terminator=" (e.g., "terminator=yes").
■ The maximum number of characters for Syslog tabular alignment is 5.
Termination
Side
[409]
Displays the party that terminated the call. The field value is a string:
■ "LCL": SBC Outgoing leg or Tel side.
■ "RMT": SBC Incoming leg or IP side.
■ "UNKN": Unknown
For example, if the Orig field is "RMT" and this Termination Side field is "LCL",
then the called party ended the call.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "TrmSd".
■ The maximum number of characters for Syslog tabular alignment is 5.
Transport
Type
[421]
Displays the SIP signaling transport type protocol. The field value is a string:
■ "UDP"
■ "TCP"
■ "TLS"
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SigTransportType" for Gateway Syslog and Local
Storage, and "TransportType" for SBC Syslog and Local Storage.
■ The maximum number of characters for Syslog tabular alignment is 16.
- 1013 -