CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
â– The case-sensitive string, "<MAC>" can be used in the file
name for instructing the device to replace it with the
device's MAC address. For more information, see MAC
Address Placeholder in Configuration File Name.
prerecorded-tones
[PrtFileURL]
Defines the name of the Prerecorded Tones (PRT) file and the
URL address (IP address or FQDN) of the server where the
file is located. Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
'http://server_name/file'
'https://server_name/file'
Note: The maximum length of the URL address is 99
characters.
call-progress-tones
[CptFileURL]
Defines the name of the CPT file and the URL address (IP
address or FQDN) of the server where the file is located.
Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
'http://server_name/file'
'https://server_name/file'
Note: The maximum length of the URL address is 99
characters.
voice-prompts
[VpFileURL]
Defines the name of the Voice Prompts file and the URL
address (IP address or FQDN) of the server on which the file
is located. Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
'http://server_name/file'
'https://server_name/file'
Note:
â– The maximum length of the URL address is 99 characters.
cas-table
[CasFileURL]
Defines the name of the CAS file and the URL address (IP
address or FQDN) of the server where the file is located.
Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
- 1112 -
To Next Page
Loading...
Need help?
General
