EasyManuals Logo

AudioCodes E-SBC User Manual

AudioCodes E-SBC
1414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1312 background imageLoading...
Page #1312 background image
CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
Note: For the parameter to take effect, a
device reset is required.
CAS State Machines Parameters
Note: To configure the CAS State Machine table using the Web interface, see Configuring CAS
State Machines. The CAS state machine can be configured only through the Web-based
management tool.
'Generate Digit On Time'
[CASStateMachineGenerateDigitOnTime]
Generates digit on-time (in msec).
The value must be a positive value. The
default is -1.
'Generate Inter Digit Time'
[CASStateMachineGenerateInterDigitTime]
Generates digit off-time (in msec).
The value must be a positive value. The
default is -1.
'DTMF Max Detection Time'
[CASStateMachineDTMFMaxOnDetectionTime]
Detects digit maximum on time (according
to DSP detection information event) in
msec units.
The value must be a positive value. The
default is -1.
'DTMF Min Detection Time'
[CASStateMachineDTMFMinOnDetectionTime]
Detects digit minimum on time (according
to DSP detection information event) in
msec units. The digit time length must be
longer than this value to receive a
detection. Any number may be used, but
the value must be less than
CasStateMachineDTMFMaxOnDetection
Time.
The value must be a positive value. The
default is -1.
'MAX Incoming Address Digits'
[CASStateMachineMaxNumOfIncomingAddress
Digits]
Defines the limitation for the maximum
address digits that need to be collected.
After reaching this number of digits, the
collection of address digits is stopped.
The value must be an integer. The default
is -1.
'MAX Incoming ANI Digits'
[CASStateMachineMaxNumOfIncomingANIDigi
ts]
Defines the limitation for the maximum
ANI digits that need to be collected. After
reaching this number of digits, the
collection of ANI digits is stopped.
The value must be an integer. The default
is -1.
'Collect ANI'
[CASStateMachineCollectANI]
In some cases, when the state machine
handles the ANI collection (not related to
MFCR2), you can enable the state
machine to collect ANI or discard ANI.
â–  [0] No = Don't collect ANI.
- 1274 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes E-SBC and is the answer not in the manual?

AudioCodes E-SBC Specifications

General IconGeneral
BrandAudioCodes
ModelE-SBC
CategoryGateway
LanguageEnglish

Related product manuals