CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
configure voip > gateway
analog keypad-features >
fwd-on-busy
[KeyCFBusy]
'Forward On Busy or No Answer'
configure voip > gateway
analog keypad-features >
fwd-busy-or-no-ans
[KeyCFBusyOrNoAnswer]
Defines the key sequence on the keypad to activate the
forward on 'busy or no answer' option.
'Do Not Disturb'
configure voip > gateway
analog keypad-features >
fwd-dnd
[KeyCFDoNotDisturb]
Defines the key sequence on the keypad to activate the
Do Not Disturb option (immediately reject incoming
calls).
To activate the required forward method from the telephone:
1. Dial the user-defined sequence number on the keypad; a dial tone is heard.
2. Dial the telephone number to which the call is forwarded (terminate the number with #); a
confirmation tone is heard.
'Forward Deactivate'
configure voip > gateway
analog keypad-features >
fwd-deactivate
[KeyCFDeact]
Defines the key sequence on the keypad to deactivate
any of the call forward options. After the sequence is
pressed, a confirmation tone is heard.
Keypad Feature - Caller ID Restriction Parameters
'Restricted Caller ID Activate'
configure voip > gateway
analog keypad-features >
id-restriction-act
[KeyCLIR]
Defines the key sequence on the keypad to activate the
restricted Caller ID option. After the sequence is pressed,
a confirmation tone is heard.
'Restricted Caller ID Deactivate'
configure voip > gateway
analog keypad-features >
id-restriction-deact
[KeyCLIRDeact]
Defines the key sequence on the keypad to deactivate
the restricted Caller ID option. After the sequence is
pressed, a confirmation tone is heard.
Keypad Feature - Hotline Parameters
'Hot-line Activate'
configure voip > gateway
analog keypad-features >
hotline-act
[KeyHotLine]
Defines the key sequence on the keypad to activate the
delayed hotline option.
To activate the delayed hotline option from the telephone:
1. Dial the user-defined sequence number on the
keypad; a dial tone is heard.
- 1308 -