AudioCodes E-SBC

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
✔ Flash + 3: makes a three-way conference call (if
the Three-Way Conference feature is enabled,
i.e., the parameter Enable3WayConference is
set to 1 and the parameter
3WayConferenceMode is set to 2).
■ [2] Sequence 2 = Sequence of flash button with digit:
✔ Flash only: Places a call on hold.
✔ Flash + 1:
1) When the device handles two calls (an active
and a held call) and this key sequence is dialed, it
sends a SIP BYE message to the active call and
the previously held call becomes the active call.
2) When there is an active call and an incoming
waiting call, if this key sequence is dialed, the
device disconnects the active call and the
waiting call becomes an active call.
✔ Flash + 2: Places a call on hold and answers a
call-waiting call, or toggles between active and
on-hold calls.
✔ Flash + 3: Makes a three-way conference call.
This is applicable only if the
Enable3WayConference parameter is set to 1
and the 3WayConferenceMode parameter is set
to 2, and the device houses MPMs. Note that the
settings of the ConferenceCode parameter is
ignored.
✔ Flash + 4: Makes a call transfer.
Note: The parameter is applicable only to FXS interfaces.
'Flash Keys Sequence Timeout'
flash-key-seq-tmout
[FlashKeysSequenceTimeout]
Defines the Flash keys sequence timeout - the time (in
msec) that the device waits for digits after the user
presses the flash button (Flash Hook + Digit mode - when
the parameter FlashKeysSequenceStyle is set to 1 or 2).
The valid range is 100 to 5,000. The default is 2,000.
Keypad Feature - Call Forward Parameters
'Forward Unconditional'
configure voip > gateway
analog keypad-features >
fwd-unconditional
[KeyCFUnCond]
Defines the key sequence on the keypad to activate the
immediate call forward option.
'Forward No Answer'
configure voip > gateway
analog keypad-features >
fwd-no-answer
[KeyCFNoAnswer]
Defines the key sequence on the keypad to activate the
forward on no answer option.
'Forward On Busy' Defines the key sequence on the keypad to activate the
forward on busy option.
- 1307 -