EasyManua.ls Logo

AudioCodes E-SBC - Page 1389

AudioCodes E-SBC
1414 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
[1] = Enable
For more information, see Enabling
Survivability Display on Aastra IP Phones.
'SBC Dialog-Info Interworking'
configure voip > sbc settings >
sbc-dialog-info-interwork
[EnableSBCDialogInfoInterworking]
Enables the interworking of dialog
information (parsing of call identifiers in
XML body) in SIP NOTIFY messages
received from a remote application server.
[0] Disable (default)
[1] Enable
For more information, see Interworking
Dialog Information in SIP NOTIFY
Messages.
configure voip > sbc settings >
sbc-keep-call-id
[SBCKeepOriginalCallId]
Global parameter that enables the device to
use the same call identification (SIP Call-ID
header value) received in incoming
messages for the call identification in
outgoing messages. The call identification
value is contained in the SIP Call-ID
header.
You can also configure the feature per
specific calls, using IP Profiles. For a
detailed description of the parameter and for
configuring the feature in the IP Profiles
table, see Configuring IP Profiles.
'Routing Timeout'
configure voip > sbc settings >
sbc-routing-timeout
[SbcRoutingTimeout]
Defines the maximum duration (in seconds)
that the device is prepared to wait for a
response from external servers when a
routing rule is configured to query an
external server (e.g., LDAP server) on
whose response the device uses to
determine the routing destination.
The valid value is 0 to 60. The default is 10.
For more information, see Configuring a
Routing Response Timeout on page792.
'SBC GRUU Mode'
configure voip > sbc settings >
sbc-gruu-mode
[SBCGruuMode]
Determines the Globally Routable User
Agent (UA) URI (GRUU) support,
according to RFC 5627.
[0] None = No GRUU is supplied to
users.
[1] As Proxy = (Default) The device
provides same GRUU types as the
proxy provided the device’s GRUU
clients.
[2] Temporary only = Supply only
temporary GRUU to users. (Currently
not supported.)
- 1351 -

Table of Contents

Related product manuals