AudioCodes E-SBC User Manual

CHAPTER13 Network
Mediant 1000 Gateway & E-SBC | User's Manual
■ Multiple interfaces, one per application type:
The IP Interfaces table is configured with three interfaces, each for a different application type
(one for OAMP, one for Call Control, and one for RTP Media), and each with a different VLAN
ID and default gateway:
Inde-
x
Name
Applic-
ation
Type
Eth-
ernet
Device
Inter-
face
Mode
IP Address
Prefix
Lengt-
h
Default
Gateway
0 Management
IF
OAMP 1 IPv4
Manual
192.168.0.2 16 192.168.0.
1
1 myControlIF Control 200 IPv4
Manual
200.200.85.
14
24 200.200.85
.1
2 myMediaIF Media 211 IPv4
Manual
211.211.85.
14
24 211.211.85
.1
A routing rule in the Static Routes table is required to allow remote management from a host in
176.85.49.0/24:
Index Destination Prefix Length Gateway
0 176.85.49.0 24 192.168.11.1
All other parameters are set to their respective default values. The NTP application remains
with its default application types.
■ Multiple interfaces with combined application types:
● A single interface for OAMP.
● Interfaces for Call Control and Media applications, where two of them are IPv4 interfaces
and one is an IPv6 interface.
The IP Interfaces table is configured as follows:
Ind-
ex
Name
Applic-
ation
Type
Eth-
ernet
Device
Inter-
face
Mode
IP Address
Pre-
fix
Leng-
th
Default
Gateway
0 Mgmt OAMP 1 IPv4
Manual
192.168.0.2 16 192.168.0.
1
1 MediaCntrl1 Media +
Control
201 IPv4
Manual
200.200.85.14 24 200.200.8
5.1
2 MediaCntrl2 Media +
Control
202 IPv4
Manual
200.200.86.14 24 200.200.8
6.1
3 V6CntrlMed
ia2
Media +
Control
202 IPv6
Manual
2000::1:200:200:8
6:14
64 ::
1. A routing rule in the Static Routes table is required to allow remote management from a host in
176.85.49.0/24:
- 103 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English