AudioCodes E-SBC User Manual

CHAPTER16 Services
Mediant 1000 Gateway & E-SBC | User's Manual
3. Configure a Cost Group according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 16-16:Cost Groups Table Parameter Descriptions
Parameter Description
'Index'
[CostGroupTable_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Name'
cost-group-name
[CostGroupTable_
CostGroupName]
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters.
Note:
■ Each row must have a unique name.
■ The parameter value cannot contain a forward slash (/).
'Default Connection
Cost'
default-
connection-cost
[CostGroupTable_
DefaultConnectionCost]
Defines the call connection cost (added as a fixed charge to the
call) for a call outside the time bands.
The valid value range is 0-65533. The default is 0.
Note: When calculating the cost of a call, if the current time of the
call is not within a time band configured for the Cost Group, then
this default connection cost is used.
'Default Minute Cost'
default-minute-
cost
[CostGroupTable_
DefaultMinuteCost]
Defines the call charge per minute for a call outside the time
bands.
The valid value range is 0-65533. The default is 0.
Note: When calculating the cost of a call, if the current time of the
call is not within a time band configured for the Cost Group, then
this default charge per minute is used.
Configuring Time Bands for Cost Groups
The Time Band table lets you configure Time Bands per Cost Group. A Time Band defines a day
and time range (e.g., from Saturday 05:00 to Sunday 24:00) and a fixed call connection charge and
call rate per minute for this interval. You can configure up to 70 Time Bands, where up to 21 Time
Bands can be assigned to each Cost Group.
- 241 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English