AudioCodes E-SBC

CHAPTER16 Services
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'Index'
[HTTPRemoteServices_
Index]
Defines an index number for the new table row.
Note:
■ Each row must be configured with a unique index.
■ The parameter is mandatory.
'Name'
rest-name
[HTTPRemoteServices_
Name]
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 40 characters.
Note:
■ Each row must be configured with a unique name.
■ The parameter is mandatory.
■ The parameter value cannot contain a forward slash (/).
'Type'
rest-message-type
[HTTPRemoteServices_
HTTPType]
Defines the type of service provided by the HTTP remote
host:
■ [0] Routing = (Default) Routing service (also includes
Call Status and Topology Status).
■ [1] Call Status = Call status service.
■ [2] Topology Status = Topology status service (e.g.,
change in configuration).
■ [5] QoS = QoS-based call routing. For more information,
see Configuring QoS-Based Routing by Routing Server.
■ [8] General = This service type can be used for the
following services:
✔ Generating and sending CDRs to a REST server
through REST API.
✔ Querying (GET) HTTP servers using Call Setup
Rules.
Note:
■ You can configure only one remote Web service for each
of the following service types: Routing, Call Status,
and Topology Status, and QoS.
■ For the Topology Status option to be functional, you
must enable the functionality (see Enabling Topology
Status Services).
■ The Routing option also includes the Call Status and
Topology Status services.
■ If you do no configure the parameter to QoS, the device
sends QoS reports to the Topology server.
'Path'
rest-path
[HTTPRemoteServices_Path]
Defines the path (prefix) to the REST APIs.
The valid value is a string of up to 80 characters. The default
is "api".
Policy
'Policy in Group'
http-policy
Defines the mode of operation between hosts in a group,
which are configured in the HTTP Remote Hosts table for
the specific remote Web service.
- 245 -