AudioCodes E-SBC User Manual

CHAPTER18 Core Entities
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
■ The settings of the parameter also determines the
default behavior of related parameters in the IP
Profiles table (SBCRemoteRepresentationMode,
SBCKeepVIAHeaders,
SBCKeepUserAgentHeader,
SBCKeepRoutingHeaders,
SBCRemoteMultipleEarlyDialogs).
■ If the 'SBC Operation Mode' parameter is
configured in the IP Groups table, the 'SBC
Operation Mode' parameter in the SRDs table is
ignored.
■ The parameter is applicable only to the SBC
application.
'SBC Routing Policy'
sbc-routing-policy-name
[SRD_SBCRoutingPolicyName]
Assigns a Routing Policy to the SRD.
By default, no value is defined if you have configured
multiple Routing Policies. If you have configured only
one Routing Policy, the device assigns it to the SRD
by default.
For more information on Routing Policies, see
Configuring SBC Routing Policy Rules.
Note:
■ If you have assigned a Routing Policy to a
Classification rule that is associated with the
SRD, the Routing Policy assigned to the SRD is
ignored.
■ You can assign the same Routing Policy to
multiple SRDs.
■ The parameter is applicable only to the SBC
application.
'Used By Routing Server'
used-by-routing-server
[SRD_UsedByRoutingServer]
Enables the SRD to be used by a third-party routing
server for call routing decisions.
■ [0] Not Used (default)
■ [1] Used
For more information on the third-party routing server
feature, see Centralized Third-Party Routing Server.
'Dial Plan'
sbc-dial-plan-name
[SRD_SBCDialPlanName]
Assigns a Dial Plan to the SRD. The device searches
the Dial Plan for a dial plan rule that matches the
source number and if not found, for a rule that
matches the destination number. If a matching dial
plan rule is found, the rule's tag is used in the routing
and/or manipulation processes as source and/or
destination tags.
To configure Dial Plans, see Configuring Dial Plans.
'CAC Profile'
cac-profile
[SRD_AdmissionProfile]
Assigns a Call Admission Control Profile (CAC rules)
to the SRD.
By default, no value is defined.
- 324 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English