CHAPTER21 SIP Message Manipulation
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'Name'
name
[MessagePolicy_Name]
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 40 characters.
Note:
â– Each row must be configured with a unique name.
â– The parameter value cannot contain a forward slash (/).
Limits
'Max Message Length'
max-message-length
[MessagePolicy_
MaxMessageLength]
Defines the maximum SIP message length.
The valid value is up to 32,768 characters. The default is
32,768.
'Max Header Length'
max-header-length
[MessagePolicy_
MaxHeaderLength]
Defines the maximum SIP header length.
The valid value is up to 512 characters. The default is 512.
'Max Body Length'
max-body-length
[MessagePolicy_
MaxBodyLength]
Defines the maximum SIP message body length. This is the
value of the Content-Length header.
The valid value is up to 1,024 characters. The default is 1,024.
'Max Num Headers'
max-num-headers
[MessagePolicy_
MaxNumHeaders]
Defines the maximum number of SIP headers.
The valid value is any number up to 32. The default is 32.
Note: The device supports up to 20 SIP Record-Route headers
that can be received in a SIP INVITE request or a 200 OK
response. If it receives more than this, it responds with a SIP
513 'Message Too Large' response.
'Max Num Bodies'
max-num-bodies
[MessagePolicy_
MaxNumBodies]
Defines the maximum number of bodies (e.g., SDP) in the SIP
message.
The valid value is any number up to 8. The default is 8.
Policies
'Send Rejection'
send-rejection
[MessagePolicy_
SendRejection]
Defines whether the device sends a SIP response if it rejects a
message request due to the Message Policy. The default
response code is SIP 400 "Bad Request". To configure a
different response code, use the
MessagePolicyRejectResponseType parameter.
â– [0] Policy Reject = (Default) The device discards the
message and sends a SIP response to reject the request.
â– [1] Policy Drop = The device discards the message
without sending any response.
SIP Method Blacklist-Whitelist Policy
- 518 -