AudioCodes E-SBC User Manual

CHAPTER28 Configuring Supplementary Services
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'Local Phone Number'
local-phone-number
[ISDNSuppServ_
LocalPhoneNumber]
Defines a local telephone extension number for the endpoint
(e.g., the PBX extension number). The local number is used for
the following functionality:
■ Validation of source (calling) number for Tel-to-IP calls
■ Mapping between local and global (E.164) numbers between
Tel and IP sides respectively
'Module'
module
[ISDNSuppServ_Module]
Defines the device's module number to which the endpoint is
connected.
'Port'
port
[ISDNSuppServ_Port]
Defines the port number on the module to which the endpoint is
connected.
'User ID'
user-id
[ISDNSuppServ_UserId]
Defines the User ID for registering the endpoint to a third-party
softswitch for authentication and/or billing.
The valid value is a string of up to 60 characters. By default, no
value is defined.
'User Password'
user-password
[ISDNSuppServ_
UserPassword]
Defines the user password for registering the endpoint to a third-
party softswitch for authentication and/or billing.
Note: For security, the password is displayed as an asterisk (*).
'CFB Phone Number'
cfb-to_phone-number
[ISDNSuppServ_
CFB2PhoneNumber]
Defines the phone number for BRI Call Forward Busy (CFB)
services. If the BRI extension is currently in use, the device
forwards the call to this number.
Note:
■ The parameter is applicable only to BRI interfaces.
■ To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
■ For more information on configuring local handling of BRI call
forwarding, see Local Handling of BRI Call Forwarding.
'CFNR Phone Number'
cfnr-to_phone-
number
[ISDNSuppServ_
CFNR2PhoneNumber]
Defines the phone number for BRI Call Forward No Reply
(CFNR) services. If the BRI extension does not answer the call
within a user-defined timeout (see the 'No Reply Time' parameter
below), the device forwards the call to this number.
Note:
■ The parameter is applicable only to BRI interfaces.
■ To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
■ For more information on configuring local handling of BRI call
forwarding, see Local Handling of BRI Call Forwarding.
'CFU Phone Number'
cfu-to_phone-
number
Defines the phone number for BRI Call Forward Unconditional
(CFU) services. The device always forwards the call to this
number.
Note:
- 682 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English