CHAPTER43 Upgrading the Device's Software
Mediant 1000 Gateway & E-SBC | User's Manual
● Navigation tree:Setup menu > Administration tab > Maintenance folder > Software
Upgrade.
5. Click Start Software Upgrade; the wizard starts, prompting you to load a .cmp file:
● At this stage, you can quit the Software Upgrade wizard without having to reset the
device, by clicking Cancel. However, if you continue with the wizard and start
loading the cmp file, the upgrade process must be completed with a device reset.
6. Click Browse, and then navigate to and select the .cmp file.
7. Click Load File; the device begins to install the .cmp file and a progress bar displays the
status of the loading process:
- 856 -
To Next Page
Loading...
Need help?
General
