AudioCodes E-SBC User Manual

CHAPTER50 System Status
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
Line Connected Line status:
■ "0": Disconnected
■ "1": Connected
Note: The parameter is applicable only to analog interfaces.
Polarity state Port polarity:
■ "0": Normal
■ "1": Reversed
■ "2": N\A
Note: The parameter is applicable only to analog interfaces.
Line polarity Line polarity:
■ "0": Positive
■ "1": Negative
Note: The parameter is applicable only to analog interfaces.
Message Waiting
Indication
MWI status:
■ "0": Off
■ "1": On
Note: The parameter is applicable only to analog interfaces.
RTP/RTCP
Channel Identifier Channel identifier number.
RTP Direction Direction of RTP:
"Tx & Rx": both directions (transmit and receive)
Local UDP Port Local UDP port on the device.
Remote IP Addr IP address of the remote IP side.
Remote UDP Port Port of the remote IP side.
Rx Octet Count Total number of received packets.
Tx Octet Count Total number of transmitted packets.
Network Jitter Network jitter (in msec).
Roundtrip Delay Round-trip delay time (in msec).
Packet Loss Packet loss (in %).
Remote RTCP
CName
RTP Control Protocol (RTCP) Canonical Name (CNAME) - persistent
transport-level identifier for an RTP endpoint.
Channel Identifier Channel ID.
Voice Settings
Coder Displays the coder used for the call.
- 931 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English