AudioCodes E-SBC User Manual

CHAPTER53 Viewing Performance Monitoring
Mediant 1000 Gateway & E-SBC | User's Manual
3. Configure the rule according to the parameters described in the table below.
4. Click Apply.
Table 53-3: Performance Profile Table Parameter Descriptions
Parameter Description
'Index'
[PerformanceProfile_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Match
'Entity'
entity
[PerformanceProfile_
Entity]
Defines a configuration entity type to which you want to apply the
rule.
■ [0] Global = (Default) The device calculates call metrics for all
calls.
■ [1] SRD = Assigns an SRD. To specify the SRD, use the 'SRD'
parameter (see below).
■ [2] IP Group = Assigns an IP Group. To specify the IP Group, use
the 'IP Group' parameter (see below).
'IP Group'
ip-group-name
[PerformanceProfile_
IPGroupName]
Assigns an IP Group to the rule.
Note: The parameter is applicable only if you configure the 'Entity'
parameter to IP Group.
'SRD'
srd-name
[PerformanceProfile_
SRDName]
Assigns an SRD to the rule.
Note: The parameter is applicable only if you configure the 'Entity'
parameter to SRD.
'PM Type'
pmtype
[PerformanceProfile_
PMType]
Defines the type of performance monitoring metric for which you want
to configure thresholds.
■ [16] ASR (Default)
■ [17] ACD
■ [18] NER
Action
- 943 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English