AudioCodes Mediant 8000 - Connecting the T3 PSTN Interfaces; Connecting E1;T1 PSTN Cables (TP-8410 Boards); Figure 19-2: T3 - Male Connector MOLEX PN: 73100-0255

Version 6.6 125 October 2014
Installation & Operation Manual 19. Connecting to the PSTN Network
19.2 Connecting the T3 PSTN Interfaces
T3/DS-3 PSTN cables are connected to the 6310/RTM module in the rear of the
chassis. Three T3/DS-3 interfaces are provided on each 6310/RTM module.
Use a proper cable with MOLEX PN: 73100-0255 or the equivalent mini-SMB male
connector.
Figure
19-2: T3 - Male Connector MOLEX PN: 73100-0255
19.3 Connecting E1/T1 PSTN Cables (TP-8410 Boards)
E1/T1 PSTN cables are connected to the 8410/RTM module in the rear of the chassis.
Two SCSI interfaces are provided on each 6310/RTM module for connecting up to 42
E1/T1 trunks.
Use proper cables for connecting E1/T1 trunks. For more information, refer to Cables
on page 92.