AudioCodes Mediant 8000 - Figure 33-3: Activating X.509 Certificates

Version 6.6 335 October 2014
Installation & Operation Manual 33. Configuring Security Settings
 To apply the new X.509 configuration to Media Gateway boards:
1. In the Security Settings screen, click the Maintenance Actions icon
in the
top-right corner and select the Download Certificates to VoP Boards option;
the Generate X.509 Files dialog is displayed.
• Select one of the following options:
♦ All Boards - apply new X.509 configuration to all Media Gateway
boards
♦ Select Board - apply new X.509 configuration to the specific Media
Gateway board; if you select this option, choose the specific board from
the drop-down list.
Figure
33-3: Activating X.509 Certificates
2. Click OK.
The new X.509 configuration (currently configured in the Media Gateway Security
Settings tab) is applied to the specified board(s). The VoP Boards Synchronized
With Media Gateway Configuration and VoP Boards Not Synchronized With
Media Gateway Configuration lists are updated accordingly.
Note: The new X.509 configuration is applied to the Media Gateway board instantly
without any effect on the board’s service.