AudioCodes Mediant 8000 - Configuring IP to Telephone;Inbound Routing

Installation & Operation Manual 676 Document # LTRT-92224
Mediant 8000
41.6.2.2 Configuring IP to Telephone/Inbound Routing
This section describes how to configure IP to Telephone/Inbound Routing.
 To configure IP to Telephone/Inbound Routing:
1. Click
button to access the Media Gateway status screen.
2. Select the desired SIP board.
3. In the Navigation pane, select SIP
GW/IP to IP Routing IP to Telephone
/ Inbound; the IP to Telephone/Inbound Routing list screen is displayed.
4. Use the
or buttons to add or remove entries.
5. Select a specific row and then in the configuration pane, click SIP Routing IP to
Telephone Settings; the SIP Routing IP to Telephone Settings screen is
displayed.
6. Configure IP to Telephone/Inbound Routing entry parameters according to the
tables below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.