AudioCodes Mediant 8000 - Figure 37-2: Prerecorded Tones File(S) Screen with Wav Files; Figure 37-3: File Data Dialog Box

Installation & Operation Manual 432 Document # LTRT-92224
Mediant 8000
Figure 37-2: Prerecorded Tones File(s) Screen with wav Files
b. From any location on the PC, select the appropriate files and drag-drop them
into the Prerecorded Tones File(s) Screen.
3. To define a tone type, coder and default duration for each file, select the file (or
group of files to be set the same) and double click or right Click it; the File Date
window is displayed.
Figure
37-3: File Data Dialog Box
4. From the Type drop-down list, select a Ring parameter type.
5. From the Coder drop-down list, select a coder type (G.711 A-law_64, G.711 µ-
law, or Linear PCM).
6. In the Description field, enter a description (optional).
7. In the Default field, enter the duration in msec.
8. Click the
Exit button. (Press the Esc key to cancel changes.) You are
returned to the Prerecorded Tones file(s) window.