AudioCodes Mediant 8000 - Table 40-7: SIP Routing Settings

Installation & Operation Manual 578 Document # LTRT-92224
Mediant 8000
Table 40-7: SIP Routing Settings
Parameter Name Type
Provisioning
Type
Description
Add Trunk Group Id as
Prefix
Enum
No, Yes
Instant Defines whether the gateway’s Trunk Group
ID is added as prefix to the destination
phone number (i.e., called
number) for Tel-to-IP calls
Notes:
• This option can be used to define
various routing rules.
• To use this feature, you must
configure the Trunk Group IDs.
Add Trunk Id as Prefix Enum
No, Yes
Instant Defines whether the Trunk ID is added as a
prefix to the called number for Tel-to-IP
calls.
If enabled, the Trunk ID (single digit in the
range 1 to 83) is added as a prefix to the
called (destination) phone number.
This option can be used to define various
routing rules.
Replace Empty Dst
With Port Number
Enum
Disable,
Enable
Instant Defines whether the internal channel
number is used as the destination number if
the called number is missing.
Note: applicable only for Tel-to-IP calls and
if the called number is missing.