AudioCodes Mediant 8000 - Table 39-2:Media Gateway Boards RTP;RTCP Settings

Installation & Operation Manual 532 Document # LTRT-92224
Mediant 8000
Table 39-2:Media Gateway Board's RTP/RTCP Settings
Parameter Name Type Provisioning
Type
Description
RTP Base UDP Port Integer
1024 – 65535
Online Defines the lower boundary of
UDP ports used for RTP, RTCP
(RTP port + 1) and T.38 (RTP
port + 2). The upper boundary is
the Base UDP Port +10 *
(Number of Channels).
The value must be a multiple of
10.
Jitter Buffer Min Delay Integer
0 – 150
Instant Defines Jitter Buffer Minimum
Delay in milliseconds. The lower
you set the Jitter Buffer Minimal
Delay, the more significantly the
optimization factor influences the
error ratio
Jitter Buffer
Optimization Factor
Integer
0 – 13
Instant Defines the factor for dynamic
Jitter Buffer frame error/delay
optimization.
RFC2833 Receive
Payload type
Integer
96 – 127
Instant Defines the RFC 2833 Receive
Relay RTP Payload type.
RFC2833 Transmit
Payload type
Integer
96 – 127
Instant Defines the RFC 2833 Transmit
Relay RTP Payload type.
RTP RFC2198
Redundancy
Integer
1 – 5
Instant Defines whether the Media
Gateway generates RFC 2198
redundancy packets.
 0 – Disable.
 1 – Enable.
 5 - five levels of RTP
redundancy (according to
RFC 2198)
RTP RFC2198
Payload Type
Integer
96 – 127
Instant Defines the payload type for RFC
2198 redundancy packets.
RTCP Interval (msec) Integer
100 – 2147483647
Instant Defines the time interval between
the adjacent RTCP report
packets.