Installation & Operation Manual 288 Document # LTRT-92224
Mediant 8000
Parameter Name Type
Provisioning
Type
Description
with lower Activity Number have higher
priority. IP address with highest priority will
be used as Primary IP, and the rest - as
redundant IPs.
Virtual GW Index Integer
1 – 3
Online Defines the index of Virtual GW, that this
MGC Address applies to.
For MEGACO protocol: the value must match
a value of Virtual GW Index parameter in
one of the Virtual GW configuration objects,
defined for associated Media Gateway
boards; by default the value is set to 1 and
corresponds to a default Virtual GW that
represents Media Gateway board "as a
whole".
For MGCP protocol: leave it at its default (1)
to associate the MGC with the default Virtual
GW that represents the Media Gateway
board "as a whole".
31.8.3 Associating Media Gateway Controller with Media Gateway
Boards
This section describes how to associate the Media Gateway Controller with the Media
Gateway board.
To associate the Media Gateway Controller with the Media Gateway board:
1. Click
to access the Media Gateway status screen.
2. Select the Media Gateway board.
3. In the Navigation pane, select Call Control and in Configuration pane, click Call
Control Settings; the Call Control Settings screen is displayed.
4. Configure the MGC Group parameter to match the index of the Media Gateway
Controller configured in the previous section.
To Next Page
Loading...
