AudioCodes Mediant 8000 - Table 38-10: UAL Interface Properties

Version 6.6 481 October 2014
Installation & Operation Manual 38. Configuring the PSTN Subsystem
Parameter Name Type
Provisioning
Type
Description
Behavior Type Enum
Default(0),
FixedRoutingC
ontext(512)
Online Defines the internal SCTP protocol
implementation.
 For standard RFC-compliant
implementation, define the Behavior Type
as Default
 For Draft2-compliant implementation,
define the Behavior Type as
FixedRoutingContext.
SCTP Port
number
Integer
0-65535
Online Defines the local IP port used by the SCTP
associations. Each UAL Group on the Media
Gateway Board must have a unique local
SCTP port.
SCTP port 2905 is reserved for the M3UA
application. Use port 2904 or any other port
for the M2UA or M2TN application.
M3UA Variant Enum
Itu, Ansi,
China
Online Relevant for UALType=M3UA only.
Defines the national M3UA variant. It must
match configuration on the remote IP side.
Table 38-10: UAL Interface Properties
Parameter Name Type
Provisioning
Type
Description
UAL Interface
Name
String
Up to 20 chars.
Online The textual, user-defined name for the UAL
Interface, enabling it to be identified
intuitively and easily.
UAL Group ID Integer
1-16
Online Defines the UAL Group to which this UAL
Interface belongs.
Interface
Number
Integer
0-2147483647
Online Defines the Interface Number (Interface ID)
of the M2UA signaling link represented by
the UAL Interface.
Select SS7 Data
Link ID (M2UA)
Integer
0-32
Online Relevant for the M2UA (SG and MGC side)
application only.
Defines the ID of the MTP2 SS7 Data Link
with which this UAL Interface is associated.
Select Trunk
(IUA/DUA)
Integer
0-63
Online Relevant for the IUA and DUA application
only.
Defines the ID of the Trunk with which this
UAL Interface is associated.