Installation & Operation Manual 742 Document # LTRT-92224
Mediant 8000
The SBC Classification table is used as part of the generic classification process,
described above to associate the incoming SIP request with a specific IP Group.
To configure the SBC Classification:
1. Click the
button to access the Media Gateway status screen.
2. Select the SIP board.
3. In the Navigation Pane, select SIP
SBC SBC Classification; the SBC
Classifications list is displayed.
4. Use the
or buttons to add or remove entries.
5. Select a specific row and in the Configuration pane, click SBC Classification
Settings; the SBC Classification Settings screen is displayed.
6. Configure SBC Classification parameters according to the table 'SBC
Classification Parameters' below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.
Table
43-2: SBC Classification Parameters “Matching Rules”
Parameter Name Type
Provisioning
Type
Description
Source SRD Integer
-1 – 4
Instant Defines the index of the source SRD.
The source SRD is defined according to
the UDP/TCP/TLS port at which the
incoming INVITE is received. The SIP
Interface table defines the UDP/TCP/TLS
ports per SRD.
Source
Username Prefix
String
Up to 20 chars
Instant Defines the prefix of the user part of the
incoming INVITE's source URI (usually the
From URI).
Source Host String
Up to 50 chars
Instant Defines the From header URI host name
prefix of the incoming INVITE message. If
this routing rule is not required, leave the
field empty. The asterisk (*) symbol can be
used to depict any source host prefix.
Destination
Username Prefix
String
Up to 50 chars
Instant Defines the prefix of the incoming SIP
INVITE's destination URI (usually the
Request URI) user part.
Destination Host String
Up to 50 chars
Instant Defines the Request URI host name prefix
of the incoming SIP INVITE message. If
this routing rule is not required, leave the
field empty. The asterisk (*) symbol can be
used to depict any destination host prefix.
To Next Page
Loading...
