Installation & Operation Manual 454 Document # LTRT-92224
Mediant 8000
The first field is a text representation of the internal coder name. The second field is
free text, and contains the name that is to be used in the SDP. The two payload fields
define the default payload for this coder. The PTIME field defines the default to be
used for this coder. The maximal value is the basic packet size (i.e., 20) multiplied by
6.
37.6.1.1 New Coders Introduced with the Table
EVRC0 – This is actually the corrected name (according to RFC 3558) of a
existing coder. (It was formerly called EVRC.)
BV16 – Supported for BCT only.
iLBC – Supported for BCT only.
37.6.1.2 Coders Support Level
The application defines the following support levels for coders:
None - A coder with support level "None" is not supported. An error is generated
if an attempt is made to use the coder.
Full - A coder with support level "Full" is valid for all type of calls.
BCT - A coder with support level "BCT" (a new feature) is valid ONLY for BCT
calls. The coders, iLBC and BV16 belong to this feature. Other coders that
appear in the file, but are not supported in the current DSP template, also receive
this support level.
The support level is defined internally by the board.
To Next Page
Loading...
Need help?
General
