AudioCodes Mediant 8000 - Mediant

Installation & Operation Manual 646 Document # LTRT-92224
Mediant 8000
AD Object Description
MOBILE Mobile number
LDAP_ERR LDAP query failure
c. Configure a routing rule for routing the initial Tel call to the LDAP server,
using the value "LDAP" for denoting the IP address of the LDAP server.
d. For alternative routing, enable the alternative routing mechanism and
configure corresponding SIP reasons for alternative routing. For this feature,
alternative routing starts from the table row located under the LDAP query
row.
4. For the SBC application: Configure AD-based IP-to-IP routing rules:
a. Open the IP-to-IP Routing Table.
b. Select the relevant VoIP board, and then open the IP-to-IP routing table (SIP
SBC SBC Routing IP-to-IP Routing Table).
c. Configure query-result routing rules for each IP domain (private, PBX / IP
PBX, Lync / OCS clients, and mobile), using the LDAP keywords (case-
sensitive) in the Destination Username Prefix field:
Table
40-27: Destination Username Prefixes
AD Object Description
PRIVATE Private number
OCS Lync / OCS client number
PBX PBX / IP PBX number
MOBILE Mobile number
LDAP_ERR LDAP query failure
d. Configure a routing rule for routing the initial call (LDAP query) to the LDAP
server, by setting the 'Destination Type' field to LDAP for denoting the IP
address of the LDAP server.
e. For alternative routing, enable the alternative routing mechanism and
configure corresponding SIP reasons for alternative routing. For this feature,
alternative routing starts from the table row located under the LDAP query
row.