AudioCodes Mediant 8000 - 5 Power System; PEM;DC;8 K Power Entry Module; Figure 5-1: PEM;DC;8 K Power Entry Module Panel

Version 6.6 41 October 2014
Installation & Operation Manual 5. Power System
5 Power System
The DC Power System powers the Mediant 8000 from the DC power sources. It
consists of the following hardware components:

PEM/DC/8K Power Entry Module

PS/DC/8K Power Supply Module
5.1 PEM/DC/8K Power Entry Module
PEM/DC/8K Power Entry Modules are used for connecting the Mediant 8000 chassis
to the DC power sources. Two PEM/DC/8K modules are installed in the back of the
chassis and enable chassis connection to two independent DC power sources. Such a
connection provides chassis power high-availability in the event of DC power source
failure. Each of the DC input terminals is reverse current protected.
Figure
5-1: PEM/DC/8K Power Entry Module Panel