AudioCodes Mediant 8000 - Table 40-22: SIP Message Policy Parameter

Installation & Operation Manual 638 Document # LTRT-92224
Mediant 8000
Table 40-22: SIP Message Policy Parameter
Parameter
Name
Type
Provisioning
Type
Description
Max Message
Length
Integer
0-32768
Instant Defines the maximum SIP message
length.
Max Header
Length
Integer
0-256
Instant Defines the maximum SIP header
length.
Max Body
Length
Integer
0-512
Instant Defines the maximum SIP message
body length. This is the value of the
Content-Length header.
Max Num
Headers
Integer
1-16
Instant Defines the maximum number of
headers.
Max Num
Bodies
Integer
0-2
Instant Defines the maximum number of bodies.
Send Rejection Enum
PolicyReject,PolicyDrop
Instant Determines whether the device sends a
400 "Bad Request" response if a
message request is rejected.
 0 - Policy Reject - If the message is a
request, then the device sends a
response to reject the request.
 1- Policy Drop - The device ignores
the message without sending any
response.
Method List
Type
Enum
Blacklist,Whitelist
Instant Determines the policy for the SIP
methods.
 0- Policy Blacklist = The specified
methods (in the 'Method List' field)
are rejected by the policy.
 1- Policy Whitelist = The specified
methods (in the 'Method List' field)
are allowed by the policy.
Method List String
up to 256 chars
Instant Defines the SIP methods (e.g.,
“INVITE\BYE”) to which the rule applies.
The syntax for entering the methods is
as follows:
Methods must be separated by a
forward slash (\).